SALiiB
02-11-2012, 08:40 AM
Hi all
The moment has come where I have to sell the beloved one :( especially after how close I came to finishing :( in a wrap not only have I run out of money but with working less and bills to pay it comes down to this.
I'm pretty sure most of you already know/seen of the car in the build thread, but I shall recap the list of mods done. I've owned the car for the last 1 yr and 4 months, and I purchased the car with 46000kms I think, I can't remember 100% but I do have the receipt of purchase, and I am the first owner in Australia. The motor basically let go as per rotarys luck, and was rebuilt very recently with Joe at Rotormaster.
The list follows:
Rebuild with Rotormaster competition seals
2 new fd housings
Extended mildport
Studded block
850cc primary injectors
Sard 280 in tank fuel pump
Aeromotive fuel pressure regulator
Rebuild was done at 56100kms (car now has 577xx), so you can see I only just got the car back and wasn't anticipating a sale at all let alone just after getting the car back. Also other mods include:
Knightsports vmic, with air groove for the vmic, and smaller battery
Mazda twin oil coolers
Apexi pfc fitted and tuned to 307.5whp
Other mods include:
3" custom hi tech exhaust from turbos back
Re amemiya front strut brace
Cusco os-t rear strut brace
Re amemiya short shifter
Feed style side steps and re amemiya rear diffuser in carbon fibre (thanks angry panda :) )
Smoked indicators, rear and side rear lights
Feed afflux tow hook kit
Braided clutch line
Tomei gear knob
12000k hid kit
Car will come with standard parts:
Radiator, condenser, light bulbs, etc
Car already has an upgraded clutch and fly installed, also, i have an RE AD9 carbon fibre bonnet on its way, which may be included in the sale.
I also have a set of brand new Work Emotion XD9 18x9+30 front and 18x10+38 Rear for a separate price (not included in sale)
Asking price: 21000 firm, the price I believe is already cheap, I'm not into bargaining, the car is worth way more than this, and I have spent on this car only what I'm asking (I may have spent more I can't remember). Pics below
Preferred contact: 0408966566 or pm me on here
Thanks
Pics:
http://i198.photobucket.com/albums/aa295/salibaaa/IMG_0998.jpg
http://i198.photobucket.com/albums/aa295/salibaaa/IMG_0999.jpg
http://i198.photobucket.com/albums/aa295/salibaaa/IMG_1001.jpg
http://i198.photobucket.com/albums/aa295/salibaaa/IMG_1002.jpg
http://i198.photobucket.com/albums/aa295/salibaaa/rx71_zpsc0bcfbf7.jpg
http://i198.photobucket.com/albums/aa295/salibaaa/dynosheet.jpg
with the RX8 GT Wheels on (not on the car)
http://i198.photobucket.com/albums/aa295/salibaaa/rx75_zpsb63e9c2a.jpg
http://i198.photobucket.com/albums/aa295/salibaaa/rx73_zps91992274.jpg
The moment has come where I have to sell the beloved one :( especially after how close I came to finishing :( in a wrap not only have I run out of money but with working less and bills to pay it comes down to this.
I'm pretty sure most of you already know/seen of the car in the build thread, but I shall recap the list of mods done. I've owned the car for the last 1 yr and 4 months, and I purchased the car with 46000kms I think, I can't remember 100% but I do have the receipt of purchase, and I am the first owner in Australia. The motor basically let go as per rotarys luck, and was rebuilt very recently with Joe at Rotormaster.
The list follows:
Rebuild with Rotormaster competition seals
2 new fd housings
Extended mildport
Studded block
850cc primary injectors
Sard 280 in tank fuel pump
Aeromotive fuel pressure regulator
Rebuild was done at 56100kms (car now has 577xx), so you can see I only just got the car back and wasn't anticipating a sale at all let alone just after getting the car back. Also other mods include:
Knightsports vmic, with air groove for the vmic, and smaller battery
Mazda twin oil coolers
Apexi pfc fitted and tuned to 307.5whp
Other mods include:
3" custom hi tech exhaust from turbos back
Re amemiya front strut brace
Cusco os-t rear strut brace
Re amemiya short shifter
Feed style side steps and re amemiya rear diffuser in carbon fibre (thanks angry panda :) )
Smoked indicators, rear and side rear lights
Feed afflux tow hook kit
Braided clutch line
Tomei gear knob
12000k hid kit
Car will come with standard parts:
Radiator, condenser, light bulbs, etc
Car already has an upgraded clutch and fly installed, also, i have an RE AD9 carbon fibre bonnet on its way, which may be included in the sale.
I also have a set of brand new Work Emotion XD9 18x9+30 front and 18x10+38 Rear for a separate price (not included in sale)
Asking price: 21000 firm, the price I believe is already cheap, I'm not into bargaining, the car is worth way more than this, and I have spent on this car only what I'm asking (I may have spent more I can't remember). Pics below
Preferred contact: 0408966566 or pm me on here
Thanks
Pics:
http://i198.photobucket.com/albums/aa295/salibaaa/IMG_0998.jpg
http://i198.photobucket.com/albums/aa295/salibaaa/IMG_0999.jpg
http://i198.photobucket.com/albums/aa295/salibaaa/IMG_1001.jpg
http://i198.photobucket.com/albums/aa295/salibaaa/IMG_1002.jpg
http://i198.photobucket.com/albums/aa295/salibaaa/rx71_zpsc0bcfbf7.jpg
http://i198.photobucket.com/albums/aa295/salibaaa/dynosheet.jpg
with the RX8 GT Wheels on (not on the car)
http://i198.photobucket.com/albums/aa295/salibaaa/rx75_zpsb63e9c2a.jpg
http://i198.photobucket.com/albums/aa295/salibaaa/rx73_zps91992274.jpg