This is it. The very sought after Big Daddy OEM Mazda FD RX-7 brake setup.
Just removed from s7 RS. This is the bigger setup fitted to the high spec FD models including RS, RZ, Spirit R and SP (some had cross drilled rotors).
Fronts are 314mm dia x 32mm thick rotors, rears are 314mm dia by 19mm thick.
Note: this is NOT just the big callipers and rotors, but the WHOLE setup from all 4 corners, including:
Rotors
Callipers
Backing plates
Pads
Uprights
Spindles
Wheel bearings
Brake lines
All clips and mounting hardware
It's the whole setup. All is DOESN'T come with is the abs sensors (available separately). You can put yours in and fit up straight away. Or you can disassemble, put a seal kit in the callipers and paint them a pretty red like I did with my setup (see last pic).
This is an amazing factory setup that provides greatly improved performance. More expensive aftermarket kits are not strictly legal, can affect brake bias and in my experience, don't outperform these with good pads and quality fluid.
These don't come up for sale very often!!
All parts are in good operating order and within spec. Asking $1,400ono
Note: minimum 17" wheels are required to clear these bigger brakes.
Pickup is welcomed from Newcastle NSW or I will be happy to post via courier. Cost will depend on where you are but given the weight of these, expect around $25 per corner.